Gentiv ultra to spare you the cutting out part I
Gentiv ultra to
spare you the cutting out part I'm gonna cut that out and then we're going to
glue it to a piece of lexan and this is it's not plexiglass plexiglass will
shatter this is lexan this I think this is what they use for NASCAR windshields
this is some really really good stuff it won't break this is a matter of fact
this piece is probably about eight years old on that one that's right we've
been making these things for people for going on 20 years now so that stroke
machines Hillary's spanking tables we've been making stuff for people for a
long time anyway we're gonna cut this out cut this out and then we're gonna
glue it to this and then we're going to take it to the saw saw the outside
diameter saw the inside diameter be right back alright so we're gonna get this
and glue it to that we have oh there we go product placement we have a spray
stick we're gonna spray on this don't really need that much and we spread the
sticky around and there we go whoo look out down so we have glued this right on
to the Lex and now we're going to take it over to the saw saw the corners off
then we're going to pop a hole in it and take it over to the scroll saw and cut
the inside diameter [Music] [Music] and there's our outside diameter Oh put it
under there pretty much cut oh go ahead and take it over to the sander sand
these edges a little b Gentiv ultra
Reviews it then it'll be straight to the scroll saw [Applause]
[Applause] next step would be scroll saw [Applause] and there's that piece now
we have to we will take it over and sand the inside of it with the sander now
we'll give it a little inside sanding and whoa there we go way back there and
there we have one almost done baseplate all we have left to do is drill and
countersink the two mounting holes oh look out there we go that's what it's
supposed to look like and we'll be right back so the next thing we're going to
do is drill and countersink these holes and we'll start out with the 8 inch
pilot drill like we did last time jump up to the side okay yeah then we'll do
the countersink first we have to set the depth here's one for you this is a this
is how I set the depth on my counter sink if you go [Music] and there we go to
countersunk holes with my depth gauge there we go alright now the next part is
going to be to bend right across that line right there and we'll set up for
that next alright the next thing is to bend this I don't remember what it said
to bend it to but it's it's that angle there so I'll put this in here and I
will heat it up with the heat gun and put a little tension on it and hopefully
the band and I don't blister it too much anytime J 900 suck
https://www.facebook.com/Gentiv-Ultra-479890469467727/
Comments
Post a Comment